Day 1 of Dip Tank Building

I feel like this blog is going to be more of a picture gallery post, but in short, I decided to make my own dip tanks for Silver Nitrate and for KCN solutions.  Ive had friends that would buy their tanks from Lund that costs about 160 each ( I believe)and I know that is way out of my college student budget, so luckily I happen to know very excellent people who are good at crafting with wood and power tools, so I emailed one of them. ( THANK YOU DAVE ) 
So when the day came, my dad and I traveled to the Man Cave, Dave had the wood and acrylic supplies all layer out ready to go. 

Daves cat, LB, lending a helping claw.

As you see in the picture above, their is a dip tank. Its the one that we use every time we go to Old Town to do plates there and also when anyone does a shoot for on location. We went with the same design. Its what we know and what we are used to. 

Materials Used:
Half inch plywood
Prefinished maple
Black Walnut
Acrylic
Tools Used:
Table saw
Drillpress
Compound mitre saw
Nail gun
Acrylic adhesive

One of the first things Dave did, was to use the table saw to cut the acrylic. I have had little experience with using a table saw myself. For other projects my parents and I did for home, I always assisted in helping holding crown molding or base boards on the table saw, but never really interacted with the power tool. 
After the acrylic was cut the next part was to use some acrylic adhesive in a syringe and needle and to apply it to the seams. 

Always had a bit of a shaky hand when it comes to things like this, so Dave did most of this part.

Next step was to take some refinished maple wood and use the table saw to cut out the frames and then glue them together and also use a nail gun. 

While looking around in Daves wood shop, I noticed that he had a unfinished dip tank that was meant to be a fixer one and it had a window cut out so you could see the clear acrylic while the fixing process was happening, so I asked if I could use that design and he gave me the okay. 
so before gluing the fixer wood frames together I picked out a side of which I wanted to be front, and my dad used a Compound mitre saw to cut a square, then we both used a hand saw to finish the corners. 

As for the last of our day, we glued everything together and then used the table saw to cut lids for the dip tanks. 

And last but not least was to cut the legs for the tanks so they can sit up at an angle. I didn't really photograph this part. But pictures of how it turned out will come soon!